The distal limb is the most radiographed region of the horse, and the one where anatomy and imaging overlap most closely: almost every bone, joint and ligament attachment below the carpus has a view designed to show it. This article takes the forelimb from the hoof to the cannon, explains how the views are named, and says what each standard view is for and which normal features are mistaken for disease. The hindlimb is built the same way below the hock; replace palmar with plantar and metacarpal with metatarsal. Normal images to practise on are on the limbs imaging page.

How the views are named

Equine views are named by the direction the X-ray beam travels: from the surface it enters to the surface it leaves. A dorsopalmar (DPa) view enters the dorsal surface and exits the palmar surface. A lateromedial (LM) view enters laterally. Oblique views combine two directions: a dorsolateral-palmaromedial oblique (DLPaMO) enters dorsolaterally and exits palmaromedially. When the beam is also angled up or down, proximal or distal is added, as in the dorsoproximal-palmarodistal oblique (DPr-PaDiO) of the foot.1

This system is worth learning properly, because the name tells you which structures are projected free of the others. In a DLPaMO view the dorsolateral and palmaromedial aspects of the bones are shown in profile; in the opposite oblique, the DMPaLO, the dorsomedial and palmarolateral aspects are. A lesion on one border is often visible on only one oblique. Most practices also use a marker on the lateral or dorsal side so the image can be oriented.

The foot

Preparation

The foot is prepared before it is radiographed. The shoe is usually removed, the sole is cleaned, and the sulci of the frog are packed with a material of soft-tissue opacity. If they are not packed, the air in the sulci makes dark lines across the distal phalanx and navicular bone that look exactly like fractures.1 This is the most common artefact in equine foot radiography.

Bones and joint

Three bones meet in the foot: the distal end of the middle phalanx (short pastern), the distal phalanx (coffin bone) and the distal sesamoid bone (navicular bone), which together form the distal interphalangeal (coffin) joint. The navicular bone lies palmar to the joint, where the deep digital flexor tendon passes over its flexor surface on the way to its insertion on the distal phalanx.3

The lateromedial view

On a well-positioned LM view the heels of the hoof and the two palmar processes of the distal phalanx are superimposed, and the joint spaces are even. This view shows:

  • The dorsal hoof wall and the dorsal surface of the distal phalanx, which are normally parallel.
  • The extensor process at the proximal dorsal tip of the distal phalanx, where the common digital extensor tendon inserts.
  • The solar margin of the distal phalanx and its relation to the sole.
  • The navicular bone in profile, palmar to the coffin joint.
  • The coffin and pastern joint spaces.

A radiopaque marker on the dorsal hoof wall makes the relation between wall and bone easier to judge. The LM view is the one used to assess the position of the distal phalanx within the hoof.

The dorsoproximal-palmarodistal oblique views

The beam is angled steeply downwards from the front of the foot. Centred on the coronary band, this view shows the distal phalanx in face: its solar margin, the vascular channels that radiate towards the margin, the palmar processes and the notch at the toe. With different centring and exposure, the same projection shows the navicular bone in its long axis, projected above the coffin joint.1 On this view the distal border of the navicular bone often shows small radiolucent notches. These are synovial invaginations from the coffin joint and are normal in small number and shape; their size, number and form are what is assessed.

The palmaroproximal-palmarodistal oblique view

Often called the skyline or flexor view, this is taken with the beam directed down the back of the pastern onto the heel, with the limb placed behind the horse. It shows the flexor surface of the navicular bone tangentially: a smooth, even flexor cortex, a central sagittal ridge and a clear distinction between cortex and medulla. It is the only standard view that shows the flexor cortex itself.

Normal features of the foot that look abnormal

  • The crena, a notch in the solar margin at the toe, is a normal variant, not a fracture or lysis.
  • Vascular channels at the solar margin are normal; their width and regularity vary between horses.
  • Separate centres of ossification at the palmar processes can look like fracture fragments.
  • Ossification of the cartilages of the foot is common, especially in heavy breeds, and is often of no clinical significance.
  • Frog sulci, nail holes and dirt project over the bones as lines and spots.

The pastern

The proximal phalanx (long pastern) and the middle phalanx (short pastern) meet at the proximal interphalangeal (pastern) joint. On the LM view the pastern joint is a narrow, even space, and the dorsal surfaces of both bones should be smooth. The palmar surface of the proximal phalanx has a roughened triangular area where the distal sesamoidean ligaments attach, and its mid-shaft margins carry ligament attachments that can look slightly irregular in normal horses.3

On the DPa view the proximal phalanx has a sagittal groove at its proximal end, which articulates with the sagittal ridge of the cannon bone. The proximal palmar eminences of the proximal phalanx, one lateral and one medial, are best seen on the oblique views. Small fragments at these eminences are a recognised finding in young horses, more often in the hindlimb, so know where the eminences sit on a normal bone.

The pastern is where the hoof-pastern axis is judged on the LM view: in a balanced foot the dorsal surfaces of the phalanges and the dorsal hoof wall form a straight line.

The fetlock

The fetlock is the metacarpophalangeal joint, formed by the distal end of the third metacarpal bone, the proximal phalanx and the two proximal sesamoid bones. The standard views are LM, DPa, both obliques, and a flexed LM.1

What each view shows

  • LM: the dorsal margin of the joint, including the proximodorsal edge of the proximal phalanx and the dorsal sagittal ridge, and the proximal sesamoid bones superimposed palmar to the joint.
  • Flexed LM: the distal sagittal ridge and the condyles of the cannon bone, which are hidden by the proximal phalanx when the joint is extended.
  • DPa: the joint space, the condyles, the sagittal ridge and both sesamoids seen through the cannon. The beam is usually angled slightly downwards so that it passes through the joint.
  • Obliques: each proximal sesamoid bone in profile, its abaxial surface, and the palmar eminences of the proximal phalanx.

The proximal sesamoid bones

The medial and lateral proximal sesamoid bones are pyramid-shaped. Each has an apex proximally, a base distally, an articular surface against the cannon and an abaxial surface. The branches of the suspensory ligament insert on the abaxial surfaces and apices, and the distal sesamoidean ligaments arise from the bases.3 Small linear lucencies in the sesamoids are vascular channels and are normal when few and narrow.

Normal features of the fetlock that look abnormal

  • The ergot, a horny growth on the palmar fetlock, casts a soft-tissue opacity behind the joint.
  • On the DPa view, the sesamoids overlap the cannon and can mask or imitate lesions of the condyles.
  • In the extended LM view the condyles are partly hidden; a supposed irregularity should be checked on the flexed view.

The cannon and splint bones

The metacarpal bones are the large third metacarpal (cannon) and the two small second (medial) and fourth (lateral) metacarpals, the splint bones. The splint bones articulate proximally with the carpus and the cannon, are attached to the cannon along their length by an interosseous ligament, and taper distally to a small knob, the button, which ends above the fetlock.3

The cannon is radiographed in four views: DPa, LM and the two obliques. The obliques are the important views for the splint bones, because each projects one splint free of the cannon. The DLPaMO shows the medial splint bone (second metacarpal) in profile; the DMPaLO shows the lateral splint bone (fourth metacarpal).

Normal features of the cannon that look abnormal

  • The nutrient foramen of the cannon enters the palmar cortex and can appear as an oblique lucent line through the cortex that resembles a fracture.
  • The margins of the splint bones superimposed on the cannon in the DPa view produce lines that can be mistaken for fractures of the cannon.
  • The distal ends of the splint bones vary in shape and may appear separated from the shaft, which can look like a fracture of the button.
  • The palmar supracondylar fossae of the distal cannon appear as lucent areas on some views; know where they are before calling lysis.

Young horses

In foals the distal physis of the cannon bone and the proximal physis of the proximal phalanx are open, and appear as lucent lines across the bone. These physes close within roughly the first year of life, before many other limb physes.1 An open physis can be mistaken for a fracture; it is smooth, in a predictable place and present on both limbs. When in doubt, radiograph the opposite limb for comparison, which is good practice for any doubtful finding in a horse.

A checklist to read with

  1. Name each view from the beam’s entry to exit, and know which borders it profiles.
  2. Foot: shoe off, frog packed; LM, the two DPr-PaDiO views and the skyline.
  3. Distal phalanx: extensor process, solar margin, palmar processes, vascular channels.
  4. Navicular bone: shape, distal border invaginations, flexor cortex on the skyline.
  5. Pastern: joint space, ligament attachments, hoof-pastern axis.
  6. Fetlock: sagittal ridge on the flexed LM, sesamoids on the obliques.
  7. Cannon: nutrient foramen, splint bones on the obliques, physes in young horses.
  8. Compare with the opposite limb whenever a finding is doubtful.

Equine radiographs are much easier to read once you know how the bones sit inside the hoof and around the joints. Vetomica lets you turn the horse’s distal limb in 3D and isolate each phalanx and sesamoid before you look at a film.


Sources

  1. Butler JA, Colles CM, Dyson SJ, Kold SE, Poulos PW. Clinical Radiology of the Horse, 4th ed. Wiley-Blackwell, 2017
  2. Thrall DE (ed). Textbook of Veterinary Diagnostic Radiology, 7th ed. Elsevier, 2018
  3. Budras KD, Sack WO, Röck S. Anatomy of the Horse, 6th ed. Schlütersche, 2011
  4. Dyce KM, Sack WO, Wensing CJG; Singh B (ed). Dyce, Sack, and Wensing’s Textbook of Veterinary Anatomy, 5th ed. Elsevier, 2018